Sintered Iron Bearing Ball 2 Bolt Flange Bearing, 16 Gauge - 12 mm
with SAE30 Non-Detergent Oil, Center to Center 1.75", Overall Length 2.313", Bearing Width 0.5", Spherical Diameter 1", Snug to tight Fit
- Triangle Series
- FM
- Type
- Flange Bearing
- Shaft Size (Bore ID)
- 12 mm
- Inside Diameter Lower Tolerance
- 12.016 mm
- Inside Diameter Upper Tolerance
- 12.043 mm
- Bearing Insert Type
- Bearing Ball without Bushing
- Bearing Ball Material
- Sintered Iron
- Bearing Spherical Diameter
- 1"
- Other Lubrication Apparatus Options Available
- Yes
- Type of Lubricant
- SAE30 Non-Detergent Oil
- Bearing Width
- 0.5"
- Number of Mount Holes
- 2
- Mount Material
- Steel
- Mount Material Gauge
- 16 Gauge
- Overall Length
- 2.313"
- Mount Width
- 1.125"
- Mount Hole Center to Center
- 1.75"
- Mount Hole Shape
- Round
- Mount Socket Diameter
- 1.063"
- Static Load Rating (lbf)
- 900
- Finish
- Pre-Plated Hot Dipped Galvanized Steel
- Other Mount Finish available
- Yes
- Tapped Hole Available
- No
- Bearing Fit
- Snug to tight
- Bearing Fit Options Available
- Yes
Minature 2-Bolt Flange Bearing with Sintered Iron Bearing Ball
Triangle's miniature 2-bolt flange bearings with a sintered iron bearing ball are the ideal choice when you want your smaller equipment to have quiet operation. Learn more about the benefits of our sintered iron bearing balls.
| Triangle Series: | FM |
| Type: | Flange Bearing |
| Shaft Size (Bore ID): | 12 mm |
| Inside Diameter Upper Tolerance: | 12.043 mm |
| Inside Diameter Lower Tolerance: | 12.016 mm |
| Bearing Insert Type: | Bearing Ball without Bushing |
| Bearing Material: | Sintered Iron |
| Bearing Ball Material: | Sintered Iron |
| Bearing Spherical Diameter: | 1" |
| Type of Lubricant: | SAE30 Non-Detergent Oil |
| Bearing Width: | 0.5" |
| Number of Mount Holes: | 2 |
| Mount Material: | Steel |
| Overall Length: | 2.313" |
| Mount Hole Center to Center: | 1.75" |
| Mount Socket Diameter: | 1.063" |
| Other Lubrication Apparatus Options Available: | Yes |
| Static Load Rating (lbf): | 900 |
| Mount Material Gauge: | 16 Gauge |
| Mount Width: | 1.125" |
| Mount Hole Center to Center Type: | Imperial |
| Mount Hole Shape: | Round |
| Finish: | Pre-Plated Hot Dipped Galvanized Steel |
| Other Mount Finish available: | Yes |
| Tapped Hole Available: | No |
| Bearing Fit: | Snug to tight |
| Bearing Fit Options Available: | Yes |
| Min. Quantity for RFQ: | 1000 |
| With Cushion: | No |
Minature 2-Bolt Flange Bearing with Sintered Iron Bearing Ball
Triangle's miniature 2-bolt flange bearings with a sintered iron bearing ball are the ideal choice when you want your smaller equipment to have quiet operation. Learn more about the benefits of our sintered iron bearing balls.
FM Series: Miniature Flange Bearings
Two Bolt Flange with a 1.125" Bolt Distance
Triangle's FM Series is stamped from 16-gauge steel. Available with a nylon, sintered bronze or sintered iron ball unit. Shaft sizes range from 1/4" to 3/4". Choice of material depends upon operating conditions. Sintered units operate at higher shaft speeds, higher temperatures and with more precise clearances. Nylon ball units are suitable for wash-down applications and resist salt water and harsh chemicals. View more information on Triangle's plain bearing materials.
