Linkages & Rod Ends with Sintered Iron Bearings
Manufactured with a brass or galvanized steel race.
SHAFT SIZE
“Shaft size” is the measurement of shaft for your application. It can also be similar to the measurement of the “Bore” or “Inside Diameter” of your bearing. A slightly loose shaft fit is desirable for most applications.
For linkages and rod ends, shafts are not typically used but it refers to the measurement of the bore ID whether you are using a bolt or screw through the inside diameter of your rod end. See image below.
MOUNT HOLE CENTER TO CENTER
Mount hole center to center is the distance between each mounting hole. Please see images for reference of each part.
FLANGE BEARING
PILLOW BLOCK BEARING
HANGER BEARING
PEDESTAL BEARING
OFFSET FLANGE BEARING
LINKAGE ASSEMBLY
LAZY SUSAN BEARING
OVERALL LENGTH
The Overall Length measurement is the distance from each end of a product. Please see images below for more clarification on other categories (i.e. Linkages & Rod Ends, Lazy Susan Bearings and Motor Mounts)
LINKAGES & ROD ENDS
MOTOR MOUNT BANDS
LAZY SUSAN BEARING
(
)