Sintered Bronze Bearing Ball Spherical Plain Bearing, Unmounted - 25 mm
with SAE30 Non-Detergent Oil, Bearing Width 1", Spherical Diameter 1.49"
- Triangle Series
- 40
- Type
- Spherical Plain Bearing
- Shaft Size (Bore ID)
- 25 mm
- Inside Diameter Lower Tolerance
- 25.0241 mm
- Inside Diameter Upper Tolerance
- 25.0749 mm
- Bearing Insert Type
- Bearing Ball without Bushing
- Bearing Ball Material
- Sintered Bronze
- Bearing Spherical Diameter
- 1.49"
- Other Lubrication Apparatus Options Available
- Yes
- Type of Lubricant
- SAE30 Non-Detergent Oil
- Bearing Width
- 1"
- Other Mount Finish available
- No
- Tapped Hole Available
- No
- Bearing Fit Options Available
- No
25 MM Sintered Bronze Spherical Plain Bearing
Triangle is a manufacturer of sintered bronze spherical plain bearings. Sintered bearings are low maintenance, low cost and durability.
Triangle's Sintered Bronze Bearings are Compatible with the Following Mounts:
| Triangle Series: | 40 |
| Type: | Spherical Plain Bearing |
| Shaft Size (Bore ID): | 25 mm |
| Inside Diameter Upper Tolerance: | 25.0749 mm |
| Inside Diameter Lower Tolerance: | 25.0241 mm |
| Bearing Insert Type: | Bearing Ball without Bushing |
| Bearing Material: | Sintered Bronze |
| Bearing Ball Material: | Sintered Bronze |
| Bearing Spherical Diameter: | 1.49" |
| Type of Lubricant: | SAE30 Non-Detergent Oil |
| Bearing Width: | 1" |
| Other Lubrication Apparatus Options Available: | Yes |
| Other Mount Finish available: | No |
| Tapped Hole Available: | No |
| Bearing Fit Options Available: | No |
| Min. Quantity for RFQ: | 1000 |
| With Cushion: | No |
25 MM Sintered Bronze Spherical Plain Bearing
Triangle is a manufacturer of sintered bronze spherical plain bearings. Sintered bearings are low maintenance, low cost and durability.
Triangle's Sintered Bronze Bearings are Compatible with the Following Mounts:
40 Series: Sintered Bronze Spherical Plain Bearings
Bronze Self-Lubricating Bearing with a 1.494" OD
40 Series corrosion-resistant sintered bronze spherical plain bearings come in a 1" shaft size. Use these high-precision spherical plain bearings for large load capacities, high shaft speeds and where tolerance for shock loads is required. They are also tolerant of dirt and debris. With a lower coefficient of friction and ability to operate at higher temperatures, they are the most widely used bearing type in the industry. You can find this spherical plain bearing in HF4016P and FG4016P.
