Sintered Bronze Bearing Ball Spherical Plain Bearing, Unmounted - 5/16"
with SAE30 Non-Detergent Oil, Bearing Width 0.472", Spherical Diameter 0.625"



- Triangle Series
- 41
- Type
- Spherical Plain Bearing
- Shaft Size (Bore ID)
- 5/16"
- Inside Diameter Lower Tolerance
- 0.315"
- Inside Diameter Upper Tolerance
- 0.3165"
- Bearing Insert Type
- Bearing Ball without Bushing
- Bearing Ball Material
- Sintered Bronze
- Bearing Spherical Diameter
- 0.625"
- Other Lubrication Apparatus Options Available
- Yes
- Type of Lubricant
- SAE30 Non-Detergent Oil
- Bearing Width
- 0.472"
- Other Mount Finish available
- No
- Tapped Hole Available
- No
- Bearing Fit Options Available
- No
Self-Lubricating Bronze Bearing Manufactured by Triangle
By being oil-impregnated with SAE30 non-detergent oil, Triangle's sintered bronze spherical plain bearings stay lubricated throughtout its life-span—which means less maintenance for you.
Triangle's Sintered Bronze Bearings are Compatible with the Following Mounts:
Triangle Series: | 41 |
Type: | Spherical Plain Bearing |
Shaft Size (Bore ID): | 5/16" |
Inside Diameter Upper Tolerance: | 0.3165" |
Inside Diameter Lower Tolerance: | 0.315" |
Bearing Insert Type: | Bearing Ball without Bushing |
Bearing Material: | Sintered Bronze |
Bearing Ball Material: | Sintered Bronze |
Bearing Spherical Diameter: | 0.625" |
Type of Lubricant: | SAE30 Non-Detergent Oil |
Bearing Width: | 0.472" |
Other Lubrication Apparatus Options Available: | Yes |
Other Mount Finish available: | No |
Tapped Hole Available: | No |
Bearing Fit Options Available: | No |
Min. Quantity for RFQ: | 1000 |
With Cushion: | No |
Self-Lubricating Bronze Bearing Manufactured by Triangle
By being oil-impregnated with SAE30 non-detergent oil, Triangle's sintered bronze spherical plain bearings stay lubricated throughtout its life-span—which means less maintenance for you.
Triangle's Sintered Bronze Bearings are Compatible with the Following Mounts:
41 Series: Sintered Bronze Spherical Plain Bearings
Bronze Self-Aligning Bearing with a 0.5775" OD
41 Series corrosion-resistant sintered bronze spherical plain bearings come in many shaft sizes, including 3/16", 1/4", 5/16" and 3/8". These spherical plain bearings work well with large load capacities, high shaft speeds and where tolerance for shock loads is required. Sintered Bronze bearing material is tolerant of dirt and debris, with a low coefficient of friction and has the ability to operate at higher temperatures. You can find this bearing in HA4106P.