Stamped Steel Bearing Ball Sintered Bronze Bushing Clamshell Bearing, 16 Gauge - 7/8"
with Oil Cup, Overall Length 2.375", Bearing Width 1.25", Spherical Diameter 1.691" Threaded Mount Method



- Triangle Series
- AJ
- Type
- Clamshell Bearing
- Shaft Size (Bore ID)
- 7/8"
- Inside Diameter Lower Tolerance
- 0.8755"
- Inside Diameter Upper Tolerance
- 0.8765"
- Bearing Insert Type
- Bearing Ball with Bushing
- Bushing Material
- Sintered Bronze
- Bearing Ball Material
- Stamped Steel
- Bearing Spherical Diameter
- 1.691"
- Lubrication Apparatus
- Oil Cup
- Other Lubrication Apparatus Options Available
- Yes
- Type of Lubricant
- SAE30 Non-Detergent Oil
- Bearing Width
- 1.25"
- Mount Method
- Threaded
- Mount Material
- Steel
- Mount Material Gauge
- 16 Gauge
- Overall Length
- 2.375"
- Mount Width
- 1.125"
- Mount Socket Diameter
- 0.844"
- Finish
- Pre-Plated Hot Dipped Galvanized Steel
- Other Mount Finish available
- Yes
- Tapped Hole Available
- No
- Bearing Fit Options Available
- No
Threaded Steel Clamshell Mount Manufactured with a Self-Aligning Bearing
This simple one bolt clamshell mounting is compact, functional, fully self-aligning and low-cost. In addition, Triangle's clamshell bearings can be mounted either upside down or on a side panel. For more information, click to give us a call at 920-235-3710.
Triangle Series: | AJ |
Type: | Clamshell Bearing |
Shaft Size (Bore ID): | 7/8" |
Inside Diameter Lower Tolerance: | 0.8755" |
Inside Diameter Upper Tolerance: | 0.8765" |
Bearing Insert Type: | Bearing Ball with Bushing |
Bushing Material: | Sintered Bronze |
Bearing Ball Material: | Stamped Steel |
Bearing Spherical Diameter: | 1.691" |
Lubrication Apparatus: | Oil Cup |
Type of Lubricant: | SAE30 Non-Detergent Oil |
Bearing Width: | 1.25" |
Mount Material: | Steel |
Overall Length: | 2.375" |
Mount Socket Diameter: | 0.844" |
Other Lubrication Apparatus Options Available: | Yes |
Mount Method: | Threaded |
Mount Material Gauge: | 16 Gauge |
Mount Width: | 1.125" |
Finish: | Pre-Plated Hot Dipped Galvanized Steel |
Other Mount Finish available: | Yes |
Tapped Hole Available: | No |
Bearing Fit Options Available: | No |
Min. Quantity for RFQ: | 1000 |
With Cushion: | No |
Diagram Drawing File Path: | /var/www/html/Application/webroot/pub/media/catalog/product/technical-images/AJH14A.jpg |
Bearing Insert Material: | Sintered Bronze |
Bearing Mount Type With Bearing: | No |
Threaded Steel Clamshell Mount Manufactured with a Self-Aligning Bearing
This simple one bolt clamshell mounting is compact, functional, fully self-aligning and low-cost. In addition, Triangle's clamshell bearings can be mounted either upside down or on a side panel. For more information, click to give us a call at 920-235-3710.
AJ Series: Clamshell Bearing
Our clamshell bearings, with shaft sizes ranging from 1/2" to 1", are designed to be used in a wide variety of light-duty applications and when mounting areas are too small to accommodate a standard pillow block bearing. These 16-gauge self-aligning bearings come with either oil cups or grease fittings. They are adjustable and narrower compared to other mounted bearings. By altering the length of the bolt, which is sold as part of the clamshell bearing, and adding an extension tube or spacer, you can achieve a mounting height of several inches.