Sintered Iron Bearing Ball 2 Bolt Flange Bearing, 16 Gauge - 5/8"
with SAE30 Non-Detergent Oil, Center to Center 2.25", Overall Length 3", Bearing Width 0.75", Spherical Diameter 1.19", Drag - Snug Fit - Light Duty



- Triangle Series
- FL
- Type
- Flange Bearing
- Shaft Size (Bore ID)
- 5/8"
- Inside Diameter Lower Tolerance
- 0.6255"
- Inside Diameter Upper Tolerance
- 0.627"
- Bearing Insert Type
- Bearing Ball without Bushing
- Bearing Ball Material
- Sintered Iron
- Bearing Spherical Diameter
- 1.19"
- Other Lubrication Apparatus Options Available
- Yes
- Type of Lubricant
- SAE30 Non-Detergent Oil
- Bearing Width
- 0.75"
- Number of Mount Holes
- 2
- Mount Material
- Steel
- Mount Material Gauge
- 16 Gauge
- Overall Length
- 3"
- Mount Width
- 1.5"
- Mount Hole Center to Center
- 2.25"
- Mount Hole Shape
- Round
- Mount Socket Diameter
- 1.188"
- Finish
- Pre-Plated Hot Dipped Galvanized Steel
- Other Mount Finish available
- Yes
- Tapped Hole Available
- No
- Bearing Fit
- Drag - Snug
- Bearing Fit Options Available
- Yes
- Strength
- Light Duty
Drag or Snug Fit Sintered Iron Bearing Ball on 2-Bolt Flange Mount
With a high-grade, non-detergent industrial mineral oil with a SAE 30 viscosity, Triangle's sintered iron bearing ball is able to run almost indefinitely (as long as extreme temps and shaft speeds are avoided). Learn more about our spherical plain bearing ball lubricants.
Triangle Series: | FL |
Type: | Flange Bearing |
Shaft Size (Bore ID): | 5/8" |
Inside Diameter Upper Tolerance: | 0.627" |
Inside Diameter Lower Tolerance: | 0.6255" |
Bearing Insert Type: | Bearing Ball without Bushing |
Bearing Material: | Sintered Iron |
Bearing Ball Material: | Sintered Iron |
Bearing Spherical Diameter: | 1.19" |
Type of Lubricant: | SAE30 Non-Detergent Oil |
Bearing Width: | 0.75" |
Number of Mount Holes: | 2 |
Mount Material: | Steel |
Overall Length: | 3" |
Mount Hole Center to Center: | 2.25" |
Mount Socket Diameter: | 1.188" |
Strength: | Light Duty |
Other Lubrication Apparatus Options Available: | Yes |
Mount Material Gauge: | 16 Gauge |
Mount Width: | 1.5" |
Mount Hole Center to Center Type: | Imperial |
Mount Hole Shape: | Round |
Finish: | Pre-Plated Hot Dipped Galvanized Steel |
Other Mount Finish available: | Yes |
Tapped Hole Available: | No |
Bearing Fit: | Drag - Snug |
Bearing Fit Options Available: | Yes |
Min. Quantity for RFQ: | 1000 |
With Cushion: | No |
Diagram Drawing File Path: | /var/www/html/Application/webroot/pub/media/catalog/product/technical-images/FLW10.jpg |
Drag or Snug Fit Sintered Iron Bearing Ball on 2-Bolt Flange Mount
With a high-grade, non-detergent industrial mineral oil with a SAE 30 viscosity, Triangle's sintered iron bearing ball is able to run almost indefinitely (as long as extreme temps and shaft speeds are avoided). Learn more about our spherical plain bearing ball lubricants.
FL Series: Mounted Flange Bearings
Two Bolt Flange with a 2.25" Bolt Distance
Triangle's FL Series is stamped from 16-gauge steel and available with a nylon, sintered bronze or sintered iron bearing. Shaft sizes range from 1/2" to 7/8". They are suitable for use on a wide variety of mechanical equipment with relatively light loads and nominal shaft speeds. Nylon ball units will run dry or with a light film of oil almost indefinitely under the right conditions. Sintered ball units are self-lubricating and contain enough oil for the life of the equipment. View more benefits of Triangle's spherical plain bearing materials.